Welcome Guest! To enable all features please try to register or login.
2 Pages12>
Options
View
Go to last post Go to first unread
Offline tl3  
#1 Posted : Monday, March 6, 2017 1:26:37 PM(UTC)
tl3

Rank: Advanced Member

Posts: 397
United States

Thanks: 86 times
Was thanked: 277 time(s) in 128 post(s)
A monthly publication covering judging issues, questions, and relevant topics. If you have suggestions for future content please feel free to send them my way.
February 2017Issue 1.pdf (396kb) downloaded 80 time(s).
March 2017Issue 2.pdf (410kb) downloaded 38 time(s).

Edited by moderator Tuesday, July 25, 2017 11:33:02 AM(UTC)  | Reason: Re-Sticky'd

Offline tl3  
#2 Posted : Thursday, April 13, 2017 7:32:44 AM(UTC)
tl3

Rank: Advanced Member

Posts: 397
United States

Thanks: 86 times
Was thanked: 277 time(s) in 128 post(s)
RR April - teaser BigGrin It's coming, but will be in a different location with some other new aspects. Stay tuned...
Offline Gil R. Major  
#3 Posted : Thursday, April 13, 2017 3:38:28 PM(UTC)
Gil R. Major

Rank: Advanced Member

Medals: Board of Directors

Posts: 317

Thanks: 177 times
Was thanked: 128 time(s) in 68 post(s)
Ty, the link is not working
Sponsored by my Wife!
Life is about choices and accepting responsibility for those choices!
Offline Doug Pilcher  
#4 Posted : Thursday, April 13, 2017 3:42:52 PM(UTC)
Doug Pilcher

Rank: Advanced Member

Medals: Board of Directors

Posts: 914
United States

Thanks: 206 times
Was thanked: 427 time(s) in 252 post(s)
Not supposed to work. That was the "Teaser".
Doug Pilcher
South Central Regional Director
SC - Regional Judging Instructor
Education Committee
World's 2018 "Operations Manager"
Would rather be flyin than workin!
Offline tl3  
#5 Posted : Thursday, April 13, 2017 3:44:32 PM(UTC)
tl3

Rank: Advanced Member

Posts: 397
United States

Thanks: 86 times
Was thanked: 277 time(s) in 128 post(s)
Originally Posted by: Doug Pilcher Go to Quoted Post
Not supposed to work. That was the "Teaser".

What he said ;-)
Offline Steve Stanton  
#6 Posted : Thursday, April 13, 2017 4:21:52 PM(UTC)
Steve Stanton

Rank: Advanced Member

Posts: 269

Thanks: 30 times
Was thanked: 129 time(s) in 63 post(s)
Read Book Ref;
Trying to impress my Father-in-Law I showed him a nickel and asked what was the animal on one side.
He said it's a buffalo. I said no, it's a Bison being the smart ass that I was.
His response: If everyone calls it a Buffalo, then that makes it a Buffalo!.
The message? If enough people call it a "half square loop" it may actually be a "half square loop"?
Just Sayen.
Offline chymas  
#7 Posted : Thursday, April 13, 2017 11:01:45 PM(UTC)
chymas

Rank: Advanced Member

Medals: Board of Directors

Posts: 196
United States

Thanks: 66 times
Was thanked: 41 time(s) in 27 post(s)
^^^^

Different family, different judging criteria....
thanks 1 user thanked chymas for this useful post.
Gil R. Major on 4/14/2017(UTC)
Offline Silver Fox  
#8 Posted : Friday, April 14, 2017 6:19:09 AM(UTC)
Silver Fox

Rank: Advanced Member

Posts: 462

Thanks: 86 times
Was thanked: 167 time(s) in 106 post(s)
Originally Posted by: Steve Stanton Go to Quoted Post
Read Book Ref;
Trying to impress my Father-in-Law I showed him a nickel and asked what was the animal on one side.
He said it's a buffalo. I said no, it's a Bison being the smart ass that I was.
His response: If everyone calls it a Buffalo, then that makes it a Buffalo!.
The message? If enough people call it a "half square loop" it may actually be a "half square loop"?
Just Sayen.
Hey Steve.... I hear you loud and clear. And as Clark alluded to above.... the criteria for a square loop (Family 7) is clear and different from a vertical line (Family 1).

Pilots really can call it what they want as if that is what registers in their mind on the flight line when competing, and as we know, with the judges behind us and knees knocking & mouth dry.... The less distractions we have...the better.

The true situation, though, is that a vertical line (Family 1) does not require entry and exit radii on the ¼ loops to be the same. In addition, the vertical line can have elements on it. On the other hand..... on a square loop, ALL radii have to be the same or a 1 point deduction is applied for each mismatch. In addition elements can ONLY be applied on the horizontal portion of the square loop (Top line if it is up or bottom line if it is down).

So....there is a CLEAR difference between the two families and the reference to "Half Square loop" and the connotations that come with it are stark. I am aware that in pattern, they do have a reference to the "beast" and maybe that was where the reference originated.

I know that you already know the above....however, I wanted our new Basic pilots to be aware of what the difference is and why a "vertical line" should be ingrained in their young minds as they learn and move up in the classes.
Best regards,
Wayne

To know the road ahead........ Ask those coming back.! (Chinese Proverb)
www.sewbusy.com
thanks 8 users thanked Silver Fox for this useful post.
tl3 on 4/14/2017(UTC), Earle Andrews on 4/14/2017(UTC), chymas on 4/14/2017(UTC), Gil R. Major on 4/14/2017(UTC), Charles Lewis on 4/15/2017(UTC), Mark Thurman on 4/15/2017(UTC), Curtis Cozier on 4/15/2017(UTC), Steve Stanton on 4/16/2017(UTC)
Offline tl3  
#9 Posted : Tuesday, April 18, 2017 12:54:51 PM(UTC)
tl3

Rank: Advanced Member

Posts: 397
United States

Thanks: 86 times
Was thanked: 277 time(s) in 128 post(s)
Check out the new Education tab at the top of your screen...or just click here: Education BigGrin
This is the new home for RR, and other topics that relate to judging, training, and IMAC educational tidbits.
thanks 3 users thanked tl3 for this useful post.
Doug Pilcher on 4/18/2017(UTC), Earle Andrews on 4/18/2017(UTC), Mark Thurman on 6/23/2017(UTC)
Offline Phillip Vance  
#10 Posted : Tuesday, April 18, 2017 2:07:21 PM(UTC)
Phillip Vance

Rank: Advanced Member

Medals: Board of Directors

Posts: 145
United States

Thanks: 6 times
Was thanked: 30 time(s) in 18 post(s)
Originally Posted by: tl3 Go to Quoted Post
Check out the new Education tab at the top of your screen...or just click here: Education BigGrin
This is the new home for RR, and other topics that relate to judging, training, and IMAC educational tidbits.

Ty,
This site has needed this for some time. Glad you have taken an active role again. Good job!
thanks 2 users thanked Phillip Vance for this useful post.
Earle Andrews on 4/18/2017(UTC), Mark Thurman on 6/23/2017(UTC)
Offline tl3  
#11 Posted : Wednesday, April 19, 2017 7:21:00 AM(UTC)
tl3

Rank: Advanced Member

Posts: 397
United States

Thanks: 86 times
Was thanked: 277 time(s) in 128 post(s)
Originally Posted by: Phillip Vance Go to Quoted Post
Ty,
This site has needed this for some time. Glad you have taken an active role again. Good job!

Thanks Phil, but the real credit belongs to Doug. He is the one who spent countless hours getting the Education section up and running, all I did was throw out a little content.

thanks 1 user thanked tl3 for this useful post.
Mark Thurman on 6/23/2017(UTC)
Offline Doug Pilcher  
#12 Posted : Wednesday, April 19, 2017 9:14:56 AM(UTC)
Doug Pilcher

Rank: Advanced Member

Medals: Board of Directors

Posts: 914
United States

Thanks: 206 times
Was thanked: 427 time(s) in 252 post(s)
Thanks Ty but your vision! And commitment. But a thank you also goes to our Webmaster for getting the backend in place.
Doug Pilcher
South Central Regional Director
SC - Regional Judging Instructor
Education Committee
World's 2018 "Operations Manager"
Would rather be flyin than workin!
Offline tl3  
#13 Posted : Friday, June 23, 2017 6:59:41 AM(UTC)
tl3

Rank: Advanced Member

Posts: 397
United States

Thanks: 86 times
Was thanked: 277 time(s) in 128 post(s)
thanks 1 user thanked tl3 for this useful post.
Mark Thurman on 6/23/2017(UTC)
Offline tl3  
#14 Posted : Tuesday, July 25, 2017 8:01:18 AM(UTC)
tl3

Rank: Advanced Member

Posts: 397
United States

Thanks: 86 times
Was thanked: 277 time(s) in 128 post(s)
thanks 1 user thanked tl3 for this useful post.
Mark Thurman on 7/25/2017(UTC)
Offline Steve Stanton  
#15 Posted : Tuesday, July 25, 2017 9:20:44 AM(UTC)
Steve Stanton

Rank: Advanced Member

Posts: 269

Thanks: 30 times
Was thanked: 129 time(s) in 63 post(s)
Nice article Steve and nice picture of Iyone telling me how to judge.
2 Pages12>
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Notification

Icon
Error